How To Build Bookshelves With Cabinets Ideas

How To Build Bookshelves With Cabinets. After i built both bottom cabinets and placed them in the corners of the room, and secured them to the wall with finish nails and a couple of screws. Again, we took the easiest route possible to build both of these and chose not to create adjustable shelving or to use pocket holes.

how to build bookshelves with cabinets
Source : www.pinterest.com

Because my built in bookcases wee covering the entire wall on each side of a door, i wanted my diy builtin bookcase ends to be flush with the sides of the base cabinets. Built in bookshelves with cabinets give the best of both open and closed storage.

Amazing Diy Builtin Buffet Shelving From Plywood And Pine

By incorporating both, you have an open area where you can display accessories and a closed area where you can keep personal items tucked away. Closets, bookshelves, tv cabinets, custom desks, fireplace surrounds, custom dining room cabinets, servers, and more.

How To Build Bookshelves With Cabinets

I took 1 1/2 inches off the base cabinet top length and cut.I used two pieces of 1×2 with a miter on the corner.I’m using the sw color grizzle gray mixed in.Keeping a potion of the built in bookslehves closed using cabinets also maintains a more sleek look and an organized style.

Measure and cut the shelves.So, we measured the wall, divided it up into the number of frames that will fit.The bookshelves were looking more complete with the window seat now in.The cabinets are wrapped in the frame, so the outside frame width will be the width of the cabinet plus 1.5 (3/4 for each side) plus a tiny bit for the melamine veneer.

Then it was on to building the countertop, which i made out of cedar 2″ x 4″ lumber using wood glue and a kreg jig to put it all together.There was some left over, so we made narrower bookshelves on each end (with no cabinets).To start, i ran three 2 x 4’s across the top of the bookshelves (in between the top front of the bookshelves and the ceiling).Use pocket holes to secure the cleat at the back of the cabinet.

Using my silly sketch, we proceeded to build the bookshelves with the three boards evenly spaced.With the seat and cabinets in place, it was time to install the final shelf above the window and get ready for the trim work.You can read more about that process here.You’ll want to make sure you are screwing and nailing into your wall studs.